Spray GUN bidet Gun Metal

Installation instructions:

Step 1:

Turn off water supply to toilet

Step 2:

Flush toilet and continue to hold down handle until toilet tank drains completely

Step 3:

Disconnect the water supply hose from toilet tank

Step 4:

Place the rubber washers inside the top and bottom ends of T-valve and apply the Teflon tape to the T-valve thread

Step 5:

Connect the female end of the T-valve to the toilet tank.

Do not over tighten

Step 6:

Connect the water supply hose to male end (bottom) of T-valve.

Do not over tighten

Step 7:

Connect the sprayer hose to the remaining port on the T-valve and connect sprayer head to hose.

Make sure rubber washers are placed in both ends of hose.

Do not over tighten

Step 8:

Mount the sprayer holder on side of toilet tank using the included hanger, or on the wall using the included screws

Step 9:

Restore water pressure with T-valve in down (off) position and allow toilet tank to fill completely.

Check for leaks

Step 10:

Adjust sprayer pressure using T-valve lever and make sure lever on T-valve is in off position when not in use